COMPANY HEADER
Request Information
  • Available In 3", 6", 9" and 12" Lengths.
  • Band: Stainless Steel - Type #304.
  • Lugs: Malleable Iron - Electro Galvanized with Zinc Chromate.
  • Bolts: Carbon Steel - Electro Galvanized with Dichromate finish.
  • Nuts: Carbon Steel - Electro Galvanized with Dichromate finish.
  • Washers: SAE Flat Washer - Zinc II plated Meets specifications of ASTM-F844.
  • Gasket: Gridded Nitrile Buna Rubber is especially resistant to aromatic hydrocarbons, gasoline, petroleum oils, mineral oils, vegetable oils and natural gas.
  • Temperature Rating: -20 degrees F to 212 degrees F.
  • Pressure rating: 150 psi (based on city water pressure).
Unit of Measure

Specifications

Brands

 N/A Matco-Norca

Series

 N/A 330

Available Lengths

 N/A 3 in6 in9 in12 in

Width

 N/A 3 in

Temperature Range

 N/A -20 to 212 ºF
Pressure Rating1 N/A 150 psi

Available Diameter

 N/A 3/8 to 24 in

Number of Bolts

 N/A 1

Band

 N/A Stainless Steel - Type #304

Lugs

 N/A Malleable Iron - Electro Galvanized with Zinc Chromate

Bolts

 N/A Carbon Steel - Electro Galvanized with Dichromate Finish

Nuts

 N/A Carbon Steel - Electro Galvanized with Dichromate Finish

Washers

 N/A Society of Automotive Engineers (SAE) Flat Washer - Zinc II Plated Meets Specifications of American Society for Testing and Materials (ASTM) - F844

Gasket

 N/A Gridded Nitrile Buna Rubber is Especially Resistant to Aromatic Hydrocarbons, Gasoline, Petroleum Oils, Mineral Oils, Vegetable Oils and Natural Gas

Features and Benefits

Features and Benefits

 N/A
  • Available for iron pipe size, copper tube size and actual outside diameter size.
  • No loose parts.
  • Can be installed with one hand.
  • Round corners with sheared edges turned down, eliminating the danger of small cuts or nicks during installation.
  • A long carriage bolt with extra-large shoulder that prevents the bolt from spinning during installation.
  • A double chamfered oversized nut that allows easy hand tightening.
  • We have the finest packing in the industry utilizing die cut boxes that are quadruple thick, eliminating all possibilities of damaging clamps both un shipping and in your inventory.

Advantages

Advantages

 N/A
  • Clamps: Pre-formed at the factory. Drop in bolt eliminates loose parts and allows for easy "one hand" installation.
  • Stainless Steel Band: Double slit so that edges on both sides of clamp turn under. This eliminates sharp edges which would cut your hand.
  • Lugs: Zinc Chromate plated malleable iron to protect against rust and corrosion.
  • Bolts: Have an extra-long square shank. Other bolts have a slightly rounded shank that allows the bolt to turn.
  • Nuts: Oversized, allowing easy "one-hand" installation.
  • Packaging: Packed in a quadruple thick, fold-up box that prevents
  • Shipping: Clamps are shipped completely assembled.
  • Made In USA: For faster service, higher quality and the ability to react to special customer needs.
  • 1 Based on City Water Pressure.